The clean development mechanism—catalyst for wide spread deployment of renewable energy technologies? or misnomer?

The (usually not professed) truth is that we are not destroying the planet due to lack of technology, but due to lack of application of technology. Indeed, opportunities exist for renewable energy technologies’ diffusion under the new climate change regime as they contribute to global sustainability through GHG mitigation and, they conform to national priorities by leading to the enhancement of local economic activity, capacities and infrastructure. The clean development mechanism (CDM), although is considered one of the global policy tools to contribute to sustainable development and technology transfer, has recently been criticised for its unequal distribution of projects across countries and for insufficiently being embedded in developing countries’ national energy context. In the above framework, this article presents the ENTTRANS approach, five indicative renewable energy technologies, and insights about a more effective application of CDM, which may be part of the international process striving towards sustainable development.     

The survey of living conditions in the Arctic (SLiCA): A comparative sustainable livelihoods assessment

The Arctic is a region of the world experiencing extremely rapid climatic and social change. Indigenous communities have faced similar challenges for millennia and have historically demonstrated remarkable resilience to socioecological perturbations. In contemporary contexts, however, it appears that the pace and extent of change is overwhelming the adaptive capacities of many indigenous communities. Scholars recently completed a survey of living conditions spanning the circumpolar Arctic to quantitatively document the impacts of social and ecological stress across regions. The database they created is called the Survey of Living Conditions in the Arctic or SLiCA. This article explores the utility of using this dataset to compare livelihood systems across three sub-regions of Alaska and four sub-regions within the Chukotka Autonomous Okrug of the Russian Federation. The results point out that livelihood systems in Chukotka have a substantially lower level of sustainability than in Northwest Alaska due to the high prevalence of vulnerable households.     

Socioeconomic development and vulnerability to land degradation in Italy

In recent years, the surface area affected by land degradation (LD) has significantly increased in southern European regions where the socioeconomic development has been proposed as a basic factor underlying the degree of vulnerability to LD. This paper investigates the correlation between several socioeconomic indicators and the level of vulnerability to LD in Italy, expressed as changes (1990–2000) in a composite index of land vulnerability (ΔLVI). The analysis was carried out over 784 local districts. The impact of per capita value added, agricultural intensity, industrial and tourism concentration, and urban growth was separately tested on ΔLVI. Results indicate that a lower district value added, crop intensification, irrigation, and the level of land vulnerability to degradation are strongly associated with the increasing level of land vulnerability over time, highlighting the role of the socioeconomic development as a main process underlying LD. In this framework, spatially equitable sustainable development may represent the effective strategy to mitigate the detrimental effects of economic growth and regional disparities on Mediterranean LD.     

Comparison of EDTA-enhanced phytoextraction and phytostabilisation strategies with Lolium perenne on a heavy metal contaminated soil

Phytoremediation is a promising and cost-effective strategy to manage heavy metal polluted sites. In this experiment, we compared simultaneously phytoextraction and phytostabilisation techniques on a Cd and Zn contaminated soil, through monitoring of plant accumulation and leaching. Lolium perenne plants were cultivated for 2 months under controlled environmental conditions in a 27.6 dm³-pot experiment allowing the collect of leachates. The heavy metal phytoextraction was promoted by adding Na-EDTA (0.5 g kg⁻¹ of soil) in watering solution. Phytostabilisation was assessed by mixing soil with steel shots (1%) before L. perenne sowing. Presence of plants exacerbated heavy metal leaching, by improving soil hydraulic conductivity. Use of EDTA for phytoextraction led to higher concentration of heavy metal in shoots. However, this higher heavy metal extraction was insufficient to satisfactory reduce the heavy metal content in soil, and led to important heavy metal leaching induced by EDTA. On the other hand, addition of steel shots efficiently decreased both Cd and Zn mobility, according to 0.01 M CaCl₂ extraction, and leaching. However, improvement of growth conditions by steel shots led to higher heavy metal mass in shoot tissues. Therefore, soil heavy metal mobility and plant metal uptake are not systematically positively correlated.     

In situ stabilization of trace metals in a copper-contaminated soil using P-spiked Linz-Donawitz slag

Purpose  

A former wood exploitation revealing high Cu and As concentration of the soils served as a case study for assisted phytoextraction.     

Distribution and relationships of As,Cd, Pb and Hg in freshwater fish from five French fishing areas

The concentrations of arsenic, cadmium, mercury and lead in 149 muscle samples of eight freshwater fish species (European eel, bream, common carp, European catfish, roach, perch, pike and pikeperch) from five different French fishing areas from contaminated and control sites were measured by inductively coupled plasma mass spectrometry after microwave digestion under pressure. No significant correlation was found between the condition factor (CF), based on the length–mass relationship, and As, Cd and Pb levels in all the samples analysed, but a positive correlation was detected between CF and Hg levels (P < 0.0001, R = 0.49). Positive correlations with body length were only found for Hg in roach (P < 0.05, R = 0.32) and Pb in bream (P < 0.05, R = 0.48) and correlations with both body weight and length were also found for Hg in pike (P < 0.05, R = 0.90 and 0.86) and Cd in European eel (P < 0.01, R = ?0.35 and ?0.37). The average content and the standard deviation in fish muscle samples was 0.007 ± 0.012, 0.102 ± 0.077, 0.142 ± 0.097 and 0.035 ± 0.053 mg kg^?1 of wet mass for Cd, As, Hg and Pb, respectively. Significant differences were established between groups of predatory fish and non-predatory fish for Hg and Pb, and between control and contaminated sites in the whole selection and also within feeding guilds, i.e. the values of Hg in the benthophagic fish were significantly different between these sites. Finally, these results were also compared for each species with previous French and European studies.     

Development of a combined isotopic and mass-balance approach to determine dissolved organic carbon sources in eutrophic reservoirs

A combined mass-balance and stable isotope approach was set up to identify and quantify dissolved organic carbon (DOC) sources in a DOC-rich (9 mg L⁻¹) eutrophic reservoir located in Western France and used for drinking water supply (so-called Rophemel reservoir). The mass-balance approach consisted in measuring the flux of allochthonous DOC on a daily basis, and in comparing it with the effective (measured) DOC concentration of the reservoir. The isotopic approach consisted, for its part, in measuring the carbon isotope ratios (δ¹³C values) of both allochthonous and autochthonous DOC sources, and comparing these values with the δ¹³C values of the reservoir DOC. Results from both approaches were consistent pointing out for a DOC of 100% allochthonous origin. In particular, the δ¹³C values of the DOC recovered in the reservoir (−28.5 ± 0.2‰; n = 22) during the algal bloom season (May-September) showed no trace of an autochthonous contribution (δ¹³C in algae = −30.1 ± 0.3‰; n = 2) being indistinguishable from the δ¹³C values of allochthonous DOC from inflowing rivers (−28.6 ± 0.1‰; n = 8). These results demonstrate that eutrophication is not responsible for the high DOC concentrations observed in the Rophemel reservoir and that limiting eutrophication of this reservoir will not reduce the potential formation of disinfection by-products during water treatment. The methodology developed in this study based on a complementary isotopic and mass-balance approach provides a powerful tool, suitable to identify and quantify DOC sources in eutrophic, DOC-contaminated reservoirs.     

Statistical modeling of crystalline silica exposure by trade in the construction industry using a database compiled from the literature

A quantitative determinants-of-exposure analysis of respirable crystalline silica (RCS) levels in the construction industry was performed using a database compiled from an extensive literature review. Statistical models were developed to predict work-shift exposure levels by trade. Monte Carlo simulation was used to recreate exposures derived from summarized measurements which were combined with single measurements for analysis. Modeling was performed using Tobit models within a multimodel inference framework, with year, sampling duration, type of environment, project purpose, project type, sampling strategy and use of exposure controls as potential predictors. 1346 RCS measurements were included in the analysis, of which 318 were non-detects and 228 were simulated from summary statistics. The model containing all the variables explained 22% of total variability. Apart from trade, sampling duration, year and strategy were the most influential predictors of RCS levels. The use of exposure controls was associated with an average decrease of 19% in exposure levels compared to none, and increased concentrations were found for industrial, demolition and renovation projects. Predicted geometric means for year 1999 were the highest for drilling rig operators (0.238 mg m(-3)) and tunnel construction workers (0.224 mg m(-3)), while the estimated exceedance fraction of the ACGIH TLV by trade ranged from 47% to 91%. The predicted geometric means in this study indicated important overexposure compared to the TLV. However, the low proportion of variability explained by the models suggests that the construction trade is only a moderate predictor of work-shift exposure levels. The impact of the different tasks performed during a work shift should also be assessed to provide better management and control of RCS exposure levels on construction sites.     

Epiphytic Algae and Lichen Cover in Boreal Forests—A Long-Term Study Along a N and S Deposition Gradient in Sweden

The aim was to describe spatiotemporal patterns of colonization of spruce branches by algae and lichens and the relationship with decreasing deposition of N and S. Coverage was estimated annually over 10 years for four Swedish Integrated Monitoring catchments with varying deposition levels. Initial hypotheses were that algal coverage would be positively correlated with deposition and that lichen coverage would be negatively correlated with S and positively with N deposition. Data were analyzed using regression, ANOVA, and partial least square regression. The results showed a temporal decrease in the coverage of algae but an increase in colonization rates, while lichens showed less uniform patterns. Within catchments, algae and lichen coverages were positively correlated with mainly S deposition. Across catchments, coverage of algae increased, while the coverage of lichens decreased with increasing N and S deposition. Colonization rates of both algae and lichens showed weak correlations with both spatial and temporal trends in N and S deposition. Thus, while N and S deposition had an effect on the colonization and coverage of algae and lichens, other factors are also important.     

Determination of ametryn in sugarcane and ametryn–atrazine herbicide formulations using spectrophotometric method

A sensitive spectrophotometric method has been developed for determination of ametryn in agricultural samples. The proposed method was based on reaction with pyridine and further coupling with sulfanilic acid to form a colored product. The absorbance was measured at 400 nm with a molar absorptivity of 2.1 × 10⁵ L mol⁻¹ cm⁻¹. The method shows a linear range from 0.2–20 μg mL⁻¹ with limit of detection and limit of quantification 0.16 and 0.54 μg mL⁻¹, respectively. The method has been successfully applied to the determination of ametryn in sugarcane juice and commercial formulations after separation of ametryn from triazine herbicides based on solvent extraction. Recovery values were found to be in the range of 96.0 ± 0.2% to 98.4 ± 0.1%.